@arbawk Thank you for your reply ! I am thinking to expand to some other locations. Have seen some that have done that, but not figured how to go forward doing it.
mgw310 firmware update v2.0.36 RSSI issue
My mgw310 just did an automatic update. Seems successful update. First, update happened in the middle of the day. Maybe the update could be scheduled by the user or occur late at night say around 3AM local time for the unit. This is when my unit would be the least occupied
Next, after the update the RSSI data numbers have changed in tar1090. They don’t make sense anymore. the numbers go from 0.0 to -10.0DBFS. Prior the numbers were about -1.5db down to -30.0 to 35.0 db before aircraft signal lost which correlates with the db gain number on the gain graph in graph1090. Can you explain the new numbers? Matching scaling is important. The old numbers seemed more accurate and these new number looks less accurate, more granular. That is a 3X lower accuracy than the previous readings, unless you add an extra digit to the RSSI number such as 1.00 vs. 1.0. then the db graphs would also need to correlate.
Wingbits
Good question. @JD’s motto is to be early. Projects with strong location restrictions like the ones you named kind of bend that rule since they limit participation (and so incentivize the right number and type of deployments). This leads them to keep rewards more consistent. I personally those are among the top choices.
Are you looking to deploy only at your location, or potentially expand to some host locations too?
Use My HeliumDeploy affiliate codes: