@DePIN_Pete You could use it still as a Router, to route your traffic via the AnonNetwork…
Just my 2 cents :)
@DePIN_Pete You could use it still as a Router, to route your traffic via the AnonNetwork…
Just my 2 cents :)
earning about 5-6 $ANYONE a DAY
pretty solid…Relay also running more then 1.5years…
the earning depends on many factors , and I agree with many others the factors are vague. But in my case, for some reason, things seem to be working in my favor: I earn around 3 tokens per day.
My relay has been up since the end of March. The Observed Bandwidth is most of the time at 8 MB/s, and the relay has the flags: FAST, RUN, V2Dir.
Whenever my earnings fluctuate ( dropping to 2 tokens per day), the only noticeable change is a drop in the Observed Bandwidth. Once it increases again, so do the earnings.
According to their Discord channel, Observed Bandwidth is measured based on upload speed only
@AloOoSh85 Great! 8Mb/s is pretty good. My observed Bandwith is bouncing between 8mb/s - 10mb/s
The Idea is great but the use case is obsolete.
You already got VPNs and the onion router, I don't see this project to gain any traction.
@SkyLynkx “you already got VPNs and the onion router”, sry sir but then you trully dont understand whats the Advantage of a decentralized Onion Routing Network in comparaison to VPNs (which still saves LOGS from you!)
This Project is the leading Infrastructure if it comes to privacy Network and it will only get bigger in the Future!
@Goku444 that's why I want it , it's on my list
Also Price can't stay that low forever
I’m not into Anyone but according to the ROI table here : https://moken.io/projects/profitability-estimates
Looks like people on average are making 0.99$ per month.
@CoinChaser im making round about 5-6 $ANYONE (2-3£ a Day) a DAY (Top 1 on the Leaderboard)
Important is to set the bandwith settings to 1000mb/s (doesnt depend if you have only 500mb/s connection from ISP).
-Connect all Devices @home with the Relay, so that you get more Traffic on it.
-try to give the Relay as much Bandwith as possible from your ISP Router, set a Rule where your Relays gets a XXX amount of Bandwith for safe
-The Relay builds its conensus in the first 30days…
@Goku444 Yeah I’ve got the bandwidth set all the way up in the RCP. I’ve connected 2 phones to the relay and just have 10hr videos playing on 1 of the phones to push through data/traffic.
Unfortunately I have Comcast, and their XB8 router/modem doesn’t let me set rules for bandwidth control for devices.
I have 2GB down and 360(ish)MB up speed.
@CoinChaser I would like to know how that average was calculated, i hardly believe that number represents the reality, i have been following this project for over a year on Discord and Telegram and this is not the impression i get from the hardware owners.
I run 2 relays, both on the same IP and the OB are at ~4mb/s and they only have a 100mbit/s connection. I can redeem 90 tokens per 30 days. The market is down and the rewards distribution is not yet at full rate, currently at 45%. The project recently increased the rewards.
Personally i think it is very good. I also use the Router mode daily and it works well. Imo, there are not many other projects that offer utility that is easy to use and have a sdk that is so easy to integrate with as Anyone.
@AnonBrethren We use the total rewards divided by the amount of miners on the network. I’m also curious to know why you haven’t added your miners to your Moken profile. I was looking to see how much you were making but I don’t see no miners.
@CoinChaser Thanks for the information.
As of now, there are ~6,200 active Anyone relays at this very moment. I don’t know how many of these are hardware devices since the number is not public.
Based on the project selling 1000 NFTs that were eligible for hardware orders (all of which sold out), followed by a few more batches in November and onward, I’d estimate that about 1/3 of all relays are hardware, let’s say ~2000. Hardware also gets a +20% rewards bonus.
To get a fairly accurate average estimate, you’d need to calculate the hardware rewards pool separately and divide it by the number of hardware devices.
@AnonBrethren Got that makes sense… Will review that with the product team. Also curious why you don’t have Anyone miners in your Moken account?
@CoinChaser I didn’t realize I could do that. I’ll consider it, but I do prioritize privacy.
https://www.anyone.io/mine
These are actual rewards for HW and non-HW and can be validated since fingerprints are visible and it is possible to cross check against the rewards distribution contract on arweave.
I’m curious to know thoughts on Anyone Router. I know that rewards start off super low, and even reading their docs it states that “Observed Bandwidth” increases over the first 56 days the device is active, but I don’t know about this project anymore.
I’ve had my device up and running for 4 weeks now, and my bandwidth did increase, but now it has gone down drastically, and hence my consensus weight is also low. I have the following tags: FAST,STABLE,HSDir,RUN,V2Dir. Currently making .264 tokens per day.
Just curious to know how others are fairing in this project.
I have a device and can’t run it at the moment as Starlink doesn’t give you a public IP. Therefore, it doesn’t work or earn anything. I’m not upgrading to business Starlink just for this service for no return from ANYONE.
Any ideas what I can do with it?
Peter